Design Settings dialog

The Design Settings dialog applies design settings to the current project.

Location

On the Design tab, click Settings.

Button, command or option	Description
Analysis	See Analysis
General	See General
Concrete	See Concrete > Cast-in-place and Concrete > Precast
Composite Beams	See Composite Beams
Design Forces	See Design Forces
Design Groups	See Design Groups
Autodesign	See Autodesign
Design Warnings (AISC/ASC only)	See Design Warnings
Steel Joists	See Steel Joists
Sway & Drift Checks	See Sway and Drift Checks
Fire check	See Fire check
OK button	Apply the changes to the current project.
Cancel button	Cancel the changes.
Save button	Save the changes back to the active settings set for future use.
Load button	Revert to the model settings specified in the active settings set.