General
|
|
Plane
|
Describes the level at which the panel was placed. |
Rotation angle
|
This value determines the following where appropriate:
- Span direction for 1-way load decomposition
- Orientation of semi-rigid 2D elements in the Solver Model
|
Include in diaphragm
|
The options are:
|
Thickness
|
Roof panel thickness
Note: Only displayed if "Include in diaphragm" is checked
|
Youngs Modulus
|
Youngs Modulus
Note: Only displayed if "Include in diaphragm" is checked
|
Shear Modulus
|
Shear Modulus
Note: Only displayed if "Include in diaphragm" is checked
|
Temperature coefficient
|
Temperature coefficient.
Note: Only displayed if "Include in diaphragm" is checked
|
Divide Stiffness by
|
Used to adjust the roof panel stiffness.
Note: Only displayed if "Include in diaphragm" is checked
|
RoofType
|
The options are:
- Default (Default)
- Flat
- Monopitch
- Duopitch
- Hip Gable
- Hip Main
- Mansard
Note: The default option assigns the roof panel as flat (if the slope < 5 deg) or Monopitch (if the slope is > 5 deg). You can more accurately specify the roof panel by choosing the appropriate option from the list.
Note: If the RoofType is changed after the wind model has already been established, you will need run Update Zones to reinstate the zoning.
|
[+] UDA
|
Customizable list of the attributes that can be applied to individual members and panels.
See: Create and manage user-defined attributes
|