subpage
|
Separate objects for each stack
|
Allows you to select which columns are exported as separate objects.
Note: Tekla Structural Designer organizes rebar information by stacks and spans. If you do not export concrete members as separate objects, no rebar information is exported.
|
Separate objects for each span
|
Allows you to select which beams or other members are exported as separate objects.
Note: Tekla Structural Designer organizes rebar information by stacks and spans. If you do not export concrete members as separate objects, no rebar information is exported.
|
Separate objects for each panel
|
Allows you to select which wall types are exported as separate objects.
|
subpage
|
Concrete columns
|
Allows you to select whether bar marks are included in the exported concrete column reinforcement information.
|
Concrete beams
|
Allows you to select whether bar marks, link leg count, and region length percentage are included in the exported concrete beam reinforcement information.
|
subpage
|
|
Resets the mappings for Structural BIM export of materials to the default settings.
|
|
Resets the mappings for Structural BIM export of decking to the default settings.
|
subpage
|
|
Allows you to control whether new imported concrete beams are automatically joined or not at the end of the import.
Note: If the BIM model contains continuous beams as one piece, you might want to clear the option. After the import, you can change the properties back, if necessary.
|
|
Allows you to select whether splice offsets are ignored when importing physical member positions.
|
subpage
|
|
Resets the mappings for TEL file import of materials to the default settings.
|
|
Resets the mappings for Structural BIM import of materials to the default settings.
|
|
Resets the mappings for Structural BIM import of decking to the default settings.
|