Inspection test properties
You can modify the testing requirements that the inspector will use for each test in the Inspection Test Setup dialog box.
Property | Description |
---|---|
Test Type |
Groups together a set of related tests. Select a test type from the drop-down menu:
|
Title | Type a unique title for the test. |
Category | Allows you to group together similar tests. You can either type the category name or select an existing one in the drop-down list. When you enter a title, the category is set to match, and can then be changed to a different value. For example, if you have several weld tests, you can set the category to Weld for all of the tests to make it easier to filter on that group of tests. |
Production Station | Select the production station that is marked as completed when a
successful or passed test record is added. This option is available only when the test type is set to Assembly. |
Main Members Only | When selected, only main members are listed as available test
subjects. Accessory parts flagged for piece tracking are not
available. This option is available only when the test type is set to Assembly. |
Notes | Type any additional text or instructions related to performing
the test. The text in the Notes field appear in the Run Test dialog box when you add a new test record. |
Test Fields | The grid on the left shows all the fields that have been entered
so far as part of the test definition in the order that they are
presented when entering a test record. The section on the right shows the details of the selected field. |
Using the buttons, you can also add, modify, move, and delete test fields.