Modify multiple production control items

Tekla PowerFab
Modified: 8 Sep 2023
2024i
Tekla PowerFab Tekla PowerFab GO

Modify multiple production control items

Use the Global Edit command to modify the properties of multiple items at one go. This way, you can save time, as you do not need to change the properties of each item individually.

  1. In the Select Production Control Job dialog box, open a job and click the Production Control ribbon tab.
  2. On the menu, select Modify Data > Global Edit.

    The Global Edit Filters dialog box opens.

  3. To modify only specific types of items, select a filter type in the Type list, and click Select.

    The Filter dialog box opens.

  4. Do one of the following depending on the filter type:
    • Click the arrow buttons to move the items that you want to modify to the Included list.
    • Type the maximum and minimum values for the items that you want to modify.
  5. Click OK.

    To further limit the items to modify, repeat steps 3 to 5.

  6. Click OK.

    The Global Edit dialog box opens.

  7. Select the properties that you want to update and modify as needed.

    You can also use Un-check All and Check Changed Fields to quickly clear or select checkboxes.

  8. Click Update.

    The Confirm dialog box opens.

  9. To confirm changing the properties of multiple items, click Yes.

The changes you made to the item properties are updated.

Was this helpful?
Previous
Next