Set the kerf

Tekla PowerFab
2023
Tekla PowerFab Tekla PowerFab GO

Set the kerf

When you create splice packages, the kerf is set to the default for that dimension.

To change the kerf setting, do as follows:

  1. Click the Maintenance ribbon tab and select Inventory > Splice Packages.
  2. Select the splice package that you want to modify.
  3. Click Details.
  4. Click the Splice Package Details ribbon tab.
  5. On the menu, select Set Kerf.
  6. In the Set Kerf dialog box, edit the kerf.
  7. To confirm the change, click OK.
Was this helpful?
Previous
Next