Apply a production code

Tekla PowerFab
Tekla PowerFab Tekla PowerFab GO

Apply a production code

To apply an existing production code to the estimating job:

  1. Ensure that you have the Prod. Code display and input fields visible in the Estimating dialog box.

    If not, do the following:

    1. Go to Maintenance > Estimating > Edit Display Fields.
    2. Move the Production Code field to the Included Fields list.
    3. Click Save.
    4. Go to Maintenance > Estimating > Edit Input Fields and repeat steps b and c.
    5. Re-open the estimating job.
  2. Click the Estimating ribbon tab.
  3. On the menu, select Global Edit > Global Edit.
  4. To only apply the production code to specific types of items, in the Estimating Global Edit Filters dialog box, select a filter type in the Type list, and click Select.
  5. In the Filter dialog box, click the arrow buttons to move the items whose properties you want to modify to the Included list.
  6. Click OK to apply the filter.
  7. In the Estimating Global Edit Filters dialog box, click OK-
  8. In the Global Edit dialog box, select the check box on the left side of Prod. Code.
  9. In the Prod. Code list, select the production code that you want to use for the selected item types.
  10. Click Update.
  11. To update the production code for the selected items, click Yes in the confiramtion dialog box.
  12. Repeat steps 2 to 10 to assign a production code for each item in the estimating job.
Was this helpful?