Modify multiple production control items

Tekla EPM
2021
Tekla EPM Tekla EPM GO

Modify multiple production control items

Use the Global Edit command to modify the properties of multiple production control items at one go.

  1. In the Production Control dialog box, click the Production Control ribbon tab.
  2. On the menu, select Modify Data > Global Edit.
  3. To only update the properties of particular items, in the Production Control Global Edit Filters dialog box, set filters:
    1. Select a filter type in the Type
    2. In the Filter dialog box, do one of the following depending on the filter type:
      • Click the arrow buttons to move the items that you want to modify to the Included list.

        Type the maximum and minimum values for the items that you want to modify.

    3. Click OK.

      Repeat substeps to set all necessary filers.

  4. At the bottom of the Production Control Global Edit Filters dialog box, click OK.
  5. In the Global Edit dialog box, select check boxes next to the properties that you want to update.

    You can also use the Un-check All and Check Changed Fields buttons to quickly clear or select check boxes.

  6. Modify the selected properties in the Global Edit dialog box according to your needs.

    For example, you can change the category of the items by selecting an option in the Category list, or type a comment for the items.

  7. Click Update to update the selected properties of the filtered production control items.
Was this helpful?
Previous
Next