Shear plate to tube column (47): Previously, the main part slotting cut was not created correctly when two shear tabs were used. This issue has now been fixed.

Shear plate simple (146): Previously, the notch cut at the top of the secondary beam was created incorrectly. This issue has now been fixed.

Import from Tekla Structural Designer: The following updates have been made for new objects in IFC export:

• The property set handling now looks for the proIfcEntityOvrd property in either the usual property set file or the additional property set file, such as pile.ccl or pile.ccl.more.
• If the proIfcEntityOvrd property is not found, there is a hard-coded mapping between the Tekla Structural Designer object type and the IFC entity type, such as IfcBeam, IfcColumn, IfcWall, IfcSlab, IfcFooting, IfcPile, or IfcMember.

IFC4 export: Previously, sub-assemblies were not exported to the correct coordinates when using IFC4 export. This issue has now been fixed.

IFC2x3 export: Previously, pours were exported in the IFC2x3 format even if the IFC entity was set to None. This issue has now been fixed.

IFC2x3 export: Multiple bolt washers are now exported correctly.

IFC4 and IFC4.3 export: Sometimes slabs or plates with cuts were not exported correctly in the IFC4 or IFC4.3 format. This issue has now been fixed.

Improved STAAD import: Importing STAAD data through FEM import is now more reliable and it now supports toe-to-toe channels which were not imported correctly earlier.

IFC2x3 export: The transparency value is now written incorrectly in IFCSURFACESTYLERENDERING in the IFC2x3 export.

Template Editor: Earlier, a text element in a template might not follow the CAP height setting, if there was a picture element in the template before it. This issue has now been fixed.

Images in templates: Images located in the model folder might have appeared shrunk when used in drawing templates in drawings. This behavior has now been fixed. 

Template Editor: Format did not work correctly for TOP_LEVEL_GLOBAL, BOTTOM_LEVEL_GLOBAL, BOTTOM_LEVEL, TOP_LEVEL, TOP_LEVEL_PROJECT,  or TOP_LEVEL_BASEPOINT in the Tekla Structures inquiry reports when imperial units were used. This issue has now been fixed.

Rebar mesh view creator: The Rebar mesh view creator now creates a view filter to avoid the inclusion of any bar that does not belong to the current cast unit.

Rebar pull-out picture and marking: The attributes LENGTH_MAX and LENGTH_MIN gave incorrect values in marks when cm was used as the unit. This issue has now been fixed.

Previously, if single-part or assembly drawings were having additional tables in the layout, and you created multi-drawings from such drawings, these tables were lost. This issue has now been fixed.

Drawing property pane: Sometimes, when you dragged mark elements in the drawing property pane visual editor, they might disappear. This issue has now been fixed.

Fabrication drawings: The Creation review dialog did not automatically suggest drawing templates for sub-assemblies. This issue has now been fixed

Free text UDAs in rebar marks: Previously, when one end of the rebar's free text UDA was empty and the other end had value, the same attribute value was shown for both ends in the rebar mark. This problem only occurred in rebars that had reversed shape, for example, in L-shaped bars. Now, the attribute value for the free text UDA is swapped correctly for reversed rebar shapes. For example, when the free text 2 (start) UDA is empty, and free text 2 (end) UDA has value, the rebar mark will show the value of free text 2 (end) for free text 2 (start) attribute and empty value for free text 2 (end) attribute, when the bar is reversed.

Executing commands in drawings is now slightly faster. Also, editing filtering settings in the view properties dialog now works better.

Rebar mesh marks in property pane: Previously, rebar mesh marks did not display all content in the property pane visual editor. This issue has now been fixed.

Earlier, entering drawing a user-defined string attribute value longer than 80 characters in the drawing properties might cause Tekla Structures to stop responding. This issue has now been fixed, and the maximum length of the drawing user-defined string attribute values is now 255 characters.

Drawing property pane visual editor: Tekla Structures stopped responding when you dragged mark elements in the mark property pane visual editor. This issue has now been fixed.

Sometimes Tekla Structures stopped responding when recreating dimensions in a drawing containing reference objects. This issue has now been fixed.

Drawing custom presentations: Previously, the available custom presentations for certain drawing objects, such as grid lines or rebar meshes, were not visible in the drawing view properties dialog or property pane. This issue has now been fixed, and custom presentations are visible.

Before, if you added %onedrivecommercial% to the path defined in the XS_PROJECT advanced option, Tekla Structures stopped working when you opened the model. This issue has now been fixed.

Tekla Model Sharing: Previously, in some rare cases, Tekla Structures might have stopped working unexpectedly during read-in. This has now been fixed.

Previously, when the Batch editor tool was used on components that create an assembly or a cast unit (for example, Wall layout), different modeling directions of the source and target components caused errors in the result. This has now been fixed.
 

Bolts: Previously, when creating studs after creating bolt holes, studs were created invisible in models, but they appeared in drawings, causing confusion. This issue has now been fixed, and studs are visible when created right after bolt holes.

When there are several expired licenses and no active licenses are available for the user, an error message is now shown on the Change license server screen. Previously there was no error message specific to this exceptional case.

When a user had more than one session of the same Tekla Structures version with the same subscription license open at the same time on the same device, the license was not released from all the sessions when the user tried to release it. Now the license is released correctly from all sessions.

Previously, a "No license available" error message was shown incorrectly when licenses were actually available for use. The issue occurred for all licenses. This issue has now been fixed.

Previously, Tekla Structures might have stopped working unexpectedly in some rare cases when the mouse pointer was moved around the model. This has now been fixed.

Previously, importing certain older .uel files to Tekla Structures in multi-user mode could cause Tekla Structures to stop working unexpectedly. This has now been fixed.

BVBS export: Sometimes, the bent mesh length and width were reported incorrectly in the export. This issue has now been fixed.

Export ELiPLAN file (68): Now only one corner cut record is exported for each element end. Previously, multiple corner cuts records were exported.

Export Unitechnik (79): A new user-defined attribute, UT_ConLayerInfo, has been added and you are now able to specify additional information for layer identification using the new Additional layer information property on the Unitechnik tab in the user-defined attributes of a concrete part.