2018 SP7: New features and improvements

Tekla Structures
2018
Tekla Structures

Korrekturen

Mängelnummer Entwicklungsgebiet Beschreibung
TSAC-1835 Concrete components Sloping slab drainage now works correctly on slabs with recesses.
TSAC-1896 Concrete components In Detailing manager, the Filter and Attribute lists now show long filter and attribute file names correctly when you open the lists. When you have selected a filter or an attribute file with a long name that does not fit in the list box and place the mouse pointer on the name, the whole name is now shown in a tooltip.
TSAC-2410 Concrete components Seam applicator now again loads custom component seams.
TSAC-2435 Concrete components In Reinforced concrete stairs (95), the stairs part now has a new STAIR_WIDTH_TOTAL UDA that counts the total stair width including the stringers.
TSAC-2457 Concrete components In Reinforced concrete stair (95), the offsets for Bar J are now applied properly.
TSAC-2771, TSAC-2769 Concrete components In Floor layout, the component attribute file list is now properly shown for all components. Previously, it was not properly shown for Mesh bars, for example.
TSAC-2349 Steel components In Railings (S77), top rail part cut creation has been improved.
TSAC-2467 Steel components In Tube gusset (20), the cut creation has been improved in cases when the gusset plate runs through the main part.
TSAC-2490 Steel components In Full depth S (185), the gap between the tab plate and the main part flanges is now correctly applied when the main part is a C or U profile.
TSAC-254 Steel components In Stairs (S71), step chamfers now work correctly.
TSAC-2541 Steel components In Stairs (S71), step chamfers now work correctly.
TSAC-2603 Steel components In Two sided clip angle (143), the extra length of bolts is now correctly applied when a different number of bolts is created on the secondary parts.
TSAC-2661 Steel components In Two sided clip angle (143), the Same bolt length for all option now works correctly for all the bolts the component creates.
TSAC-270 Steel components In Haunch (40), weld 7 is now created correctly in situations where the haunch is created as a profile.
TSAC-2805 Steel components In Haunch (40), the creation of chamfers has now been improved in situations where the hauch is created as a profile.
TSAC-2814 Steel components In Shear plate to tube column (47), the bolt assembly and bolt length increase options are now correctly applied for both secondary beams.
TSAC-303 Steel components In Stiffeners (1034), the width and height of stiffeners is now correctly applied.
TTSD-24752 Organizer In Organizer, the synchronization performance has been improved.
TTSD-13632 Import, export, interoperability

IFC4 export: Curved beam with line cut is now exported correctly in IFC4 Design Transfer View Export.

TTSD-18022 Import, export, interoperability IFC2x3 export: The grid is now exported to the same location as the model when you use the Location by: Work plane option.
TTSD-23671 Import, export, interoperability In IFC2x3 export the edge chamfers are omitted from the exported model. This is to enable better interoperability to plant design systems. If the geometry with edge chamfers is needed, you can set the IFC export type to Brep separately for those objects in the object's user-defined attributes dialog box on the IFC export tab.
TTSD-24524 Import, export, interoperability IFC2x3 export: Curved rebars are now exported with more accurate geometry when you use the Surface geometry export type.
TTSD-25076 Import, export, interoperability Reference models: Tekla Structures crashed when you pressed the Pick button in the Add model dialog box while hiding the existing reference files. This has now been fixed.
TSAC-2405 Drawings The Rebar group marking application now works with circular rebar groups.
TTSD-21381 Drawings When a template has a pull-out picture for an individual rebar of a tapered rebar group, the pull-out picture now shows the dimension lengths correctly as exact values.
TTSD-22990 Drawings

When prompted for mark content when creating an empty mark, the associativity symbol was not correctly drawn. This has now been fixed.

TTSD-16206 Tekla Model Sharing In shared models, for parametric sketched profiles with several properties, the profile geometries were calculated incorrectly after read in until model was saved and reopened. Now this has been fixed. The geometries are correct after read in. Note that all users of model need have this Service Pack in use when writing out and reading in to have the correct geometries.
TTSD-25827 Tekla Model Sharing Previously, if some files related to a model had percent signs (%) in their names, sharing the model could fail. This has now been fixed.
TSAC-2770 Reinforcement Rebar shape manager has been changed so that when you right-click a Bending schedule fields cell, if the list that opens contains a lot of items, new sub-lists are now shown to keep the list sizes more compact.
TTSD-23098 Modeling The Diagnose model command now adds a new line "Obsolete object modification rows found." if there are any rows to be removed in the model database. Use the Repair model command to remove these rows. This can considerably reduce the database size if it had become too large as a result of creating and deleting multiple objects with UDAs.
TTSD-3635 Modeling

When setting the location dimensions of items and custom parts, the small yellow arrows above the dimension value box are not shown anymore and the value you enter is now used as the dimension value.

Image
dimension arrows.png

TSAC-2785 Numbering Previously, Tekla Structures was crashing when NC files were created with contour marking and then numbered. This has now been fixed.
TSAC-2768 Import, export, interoperability (concrete) In BVBS export, you can now use multiple assembly template properties in the file name. Type the template properties in the File naming template box and separate them with blank spaces. The combination will be separated by underscores in the exported file name.
Fanden Sie das hilfreich?