You can graphically review specified deflection limits and copy the limits from one steel beam to others.

1. Open a view and change the view regime to Review View.
2. On the Review toolbar, click Show/Alter State.
3. Go to the Properties window.
4. In the Attribute list, select Deflection Limits.
5. Set Mode to Review.
6. Set Load type to the load type that you want to review.

1. Open a view and change the view regime to Review View.
2. On the Review toolbar, click Show/Alter State.
3. Go to the Properties window.
4. In the Attribute list, select Deflection Limits.
5. Set Mode to Copy.
6. In the model, click the beam from which you want to copy the deflection limits.
7. Click the beam to which you want to copy the deflection limits.

   The deflection limits are copied to the selected beam.

8. Continue copying the limits by clicking the desired beams or press Esc to finish.