About bolt gage lines
Several components use gage lines that you can use to:
-
Define the location of bolts on a brace
-
Adjust the position of individual bolts
-
Remove bolts
For example, Leg 1 - diagonal (178) uses gage lines.
Gage lines specify several dimensions:
Description | |
---|---|
1 |
Distance between bolts, horizontally |
2 |
Distance from the center of the bolt to the edge of the brace |
3 |
Distance between bolts, vertically |
To use a default set of gage lines:
-
Ensure that the gauge_lines.dat file is in the profile folder of the environment your are using,
-
Leave all the fields blank on the Parameters tab.
To learn how to change the default gage lines, see Editing default gage lines.
Components using gauge_lines.dat
The following components use the gauge_lines.dat file:
-
Tower Generation Macro (S43)
-
Tower diagonal (S66)
-
Auto position (S67)
-
Batten plates (S85)
-
Windbrace connection (110)
-
Bent gusset (140)
-
L splice (175)
-
Parallel L profiles (176)
-
Leg - 1 Diagonal (178)