CRANK_SIDE_START

CRANK_SIDE_END

Shows to which side of the splitter the crank is created at the start or end of the bar: Left or Right.

CRANK_ROTATE_START

CRANK_ROTATE_END

Shows to which angle the crank is rotated at the start or end of the bar.

CRANK_STRLEN_START

CRANK_STRLEN_END

Shows the length of the straight segment of the crank at the start or end of the bar.

This is (2) in the image above.

CRANK_LENTYPE_START

CRANK_LENTYPE_END

Shows the type of the cranked length at the start or end of the bar: Diagonal ratio , Diagonal distance , Horizontal ratio , Horizontal distance.

CRANK_RATIO_START

CRANK_RATIO_END

Shows the multiplier of the bar diameter that is used to define the cranked length at the start or end of the bar.

CRANK_DIST_START

CRANK_DIST_END

Shows the length of the cranked segment at the start or end of the bar.

If the cranked length type is Horizontal distance , this is (3) in the image above.

If the cranked length type is Diagonal distance , this is (4) in the image above.

CRANK_OFFSET_START

CRANK_OFFSET_END

Shows the offset distance of the straight segment of the crank at the start or end of the bar.

This is (5) in the image above.