XS_BASE_LINE_WIDTH
Category in Advanced options dialog box: Printing
Use this advanced option to specify the base line width for
printed drawings. Enter the value in millimeters as a decimal value. The default
value is 0.01. The
final line thicknesses in a printed drawing is the base line width multiplied by the
pen thickness from the Print Drawings dialog (or in the old printing, from the Color dialog). For example, 25 will give a thickness of 0.25 mm.
Tip:
To control the accuracy of line thickness, use a small value for
XS_BASE_LINE_WIDTH and a large number for the pen.
This advanced option also affects lines on the screen, if you set
XS_BASE_LINE_WIDTH_AFFECTS_SCREEN to
TRUE.
This advanced option is model specific and the setting is saved in the options database.