Stiffeners (1041)
Stiffeners (1041) creates rectangular or triangular stiffener plates on one or both sides of a beam or a column.
Objects created
-
Stiffeners
-
Welds
Use for
Situation | Description |
---|---|
Rectangular stiffener |
|
Triangular and rectangular stiffeners |
Selection order
-
Select the main part (beam or column).
-
Pick a position for the stiffeners.
The stiffeners are automatically created when you pick the position.
Part identification key
Description | |
---|---|
1 |
Rectangular stiffeners |
Picture tab
Use the Picture tab to define the stiffener shape and chamfer dimension.
Stiffener shape
Option | Description |
---|---|
Default Rectangular stiffeners AutoDefaults can change this option. |
|
Triangular stiffeners |
|
Rectangular stiffeners |
Stiffener chamfer
Description | |
---|---|
1 |
Define the chamfer dimension. |
Parts tab
Use the Parts tab to define the part properties.
Parts
Part | Description |
---|---|
Right stiffener |
Thickness, width, and height of the right stiffener |
Left stiffener |
Thickness, width, and height of the left stiffener |
Option |
Description |
Default |
---|---|---|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
Name |
Name that is shown in drawings and reports. |
|
Finish |
Describes how the part surface has been treated. |
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more: