Column stiffeners (1030)

Tekla Structures
2023
Tekla Structures

Column stiffeners (1030)

Column stiffeners (1030) creates stiffeners to a point you pick on a beam.

Objects created

  • Stiffeners

  • Welds

Use for

Situation Description

Upper and lower stiffeners are created on a beam.

Selection order

  1. Select the beam.

  2. Pick a point on the beam to indicate the stiffener position.

    The stiffeners are created automatically when you pick the point.

Part identification key

Description

1

Upper stiffener

2

Lower stiffener

Picture tab

Use the Picture tab to define the stiffener chamfer dimensions.

Dimensions

Description

1

Horizontal chamfer dimension

2

Vertical chamfer dimension

3

Horizontal chamfer dimension

4

Vertical position of the stiffener

Stiffeners are by default created in the vertical direction in the middle of the beam.

Parts tab

Use the Parts tab to define the part properties.

Parts

Option Description Default

Upper stiffener

Thickness, width, and height of the stiffener

Thickness = 10 mm

Width = 100 mm

Height = 200 mm

Lower stiffener

Thickness, width, and height of the stiffener

Equal to the dimensions of the upper stiffener

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Parameters tab

Use the Parameters tab to define the stiffener position and beam fitting.

Stiffener position

Description

1

Stiffener offset from the beam center line

Beam fitting

Option Description

Default

Beam is not cut.

AutoDefaults can change this option.

Beam is not cut.

Beam is cut at the point where the stiffeners are created.

General tab

Click the link below to find out more:

General tab

Analysis tab

Click the link below to find out more:

Analysis tab

Bylo to užitečné?
Předchozí
Další