1. Domů
  2. Tekla Structures
  3. Create drawings
  4. Edit drawings
  5. Create and modify marks, notes, texts, symbols and links in drawings
  6. Delete marks for selected parts

Delete marks for selected parts

Tekla Structures
2021
Tekla Structures

Delete marks for selected parts

You can easily select and delete marks for the parts that you have selected, even in big models.

With the Select part marks command you can select the part marks that you want to delete in the current window or in all drawing windows. You might want to create a selection filter first, then use area selection to select the parts. Another way to select the marks to delete is to use the Drawing content manager.

To Do this:

Delete marks for selected parts using selection filter

  1. In an open drawing, click Selection filter and create a selection filter that filters out parts that you do not want to select.

    For an example of the selection filter, see Example filter below.

  2. When you are ready, click Apply.

  3. Only activate the Select parts in drawings selection switch.

  4. Select the parts using area selection.

  5. Right-click and select Select part marks and From current drawing view or From all drawing views .

  6. To delete the marks, press Delete on the keyboard, or right-click in the drawing and select Delete.

Delete marks for selected parts using Drawing content manager

  1. In Drawing content manager, click Show to populate the Drawing content manager list.

    You can narrow your selection by selecting certain drawing views, areas or multiple objects, and then click Show

  2. Click the eye buttons next to Show in all views and Show hidden items to include in the list all building objects in the whole drawing, including the hidden building objects.

  3. Click the toggle button to activate mark selection. When you do this, the button changes to yellow .

  4. From Drawing content manager, select the building objects whose marks you want to delete.

  5. Press Delete on the keyboard, or right-click in the drawing and select Delete.

Example filter

In the following example, you do not want to delete marks from cast units with a position number B/1. This means that when you use this filter, activate the Select parts in drawings selection switch, and use area selection to select the parts, all other parts get selected.

The image below shows the selected parts and the part marks that you want to delete.

The marks have been deleted.

Bylo to užitečné?
Předchozí
Další