Tube-CrossingSaddle

Tekla Structures
2021
Tekla Structures

Tube-CrossingSaddle

Tube-CrossingSaddle connects a round tube to a round tube. The connection creates a saddle cut to the secondary tube.

Objects created

  • Cuts

  • Welds

Use for

Situation

Description

Crossing saddle connection.

Limitations

  • No support for polybeams or contour plates.

Selection order

  1. Select the main part (round tube).

  2. Select the secondary part (round tube).

    The connection is created automatically when the secondary part is selected.

Parameters tab

Use the Parameters tab to control the saddle cuts.

Connection options

Option

Description

Crossing Saddle

Creates a crossing saddle to the secondary part.

Tube NC Parameters

Option

Description

Bevel angle

The weld preparation angle created during NC processing of the tube.

The bevel is created to the secondary part.

Root opening above

The gap between the parts. The gap is created in the model.

Shrinkage

The shrinkage considered during NC processing of the tube. The shrinkage value has no effect on the model.

Maximum torch angle

Maximum torch angle.

The default is 70.0.

Minimum torch angle

Minimum torch angle.

The default is -70.0.

Note:

Bevel angle information is used only in NC data, and no actual weld preparations are created in the model.

Welding tab

Click the link below to find out more:

Create welds

General tab

Click the link below to find out more:

General tab

Analysis tab

Click the link below to find out more:

Analysis tab

Bylo to užitečné?
Předchozí
Další