Create a point load

Tekla Structures
2021
Tekla Structures

Create a point load

You can create a concentrated force or a bending moment acting on a position.

Before you start, shift the work plane if you need to create a load perpendicular to a sloped part.

  1. On the Analysis & design tab, click Load properties > Point load.
  2. In the Point Load Properties dialog box:
    1. Enter or modify the load properties.
    2. On the Distribution tab, select whether you want to attach the load to a part.
    3. Click OK to save the changes.
  3. On the Analysis & design tab, click Load > Point load.
  4. If you selected to attach the load to a part, select the part.
  5. Pick the position of the load.
Bylo to užitečné?
Předchozí
Další