TSAC-1990 |
Concrete components |
Wall layout: Previously, the Fixed drawing main view UDA on the UDA tab overwrote the value every time Wall layout was run no matter what was selected in the dialog box. Now the UDA is overwritten only if an option other than the empty default is selected in the dialog box. |
TSAC-2327 |
Concrete components |
Wall layout: The translations set in the walllayout.udas.dat file are now all taken into account. Previously, some translations were only loaded from the Objects.inp files or they were hardcoded. Now no translation string is needed in the walllayout.udas.dat file unless another translation needs to be forced in the UDA tab. |
TSAC-4409 |
Concrete components |
Wall layout connector now works for wall layouts that are wider than their height. There is a new limitation that the wall should be higher than 250 mm. |
TSAC-4758 |
Concrete components |
Wall layout: Splitting a wall layout has been changed so that all additional detailing done and UDAs set directly to the wall parts will be retained. This includes any cuts and fittings, components, connections, details, seams, and reinforcement. Earlier only generic components were retained. |
TSAC-5257 |
Concrete components |
Concrete console (110): Previously, the position of holes in the neoprene and the position of the socket connection were incorrect. This has now been fixed. |
TSAC-5271 |
Concrete components |
Concrete console (110): Previously, the cut around T-beams was incorrectly created. This has now been fixed. |
TSAC-5314 |
Concrete components |
Precast found block (1028): The Union 3 parts option that connects the created found blocks is now working properly. The result in the model corresponds with the selected connection type option. |
TSAC-5379 |
Concrete components |
Concrete foundation (1030): The positioning of the second group of injection tubes and bars is now working properly. |
TSAC-5380 |
Concrete components |
Corbel reinforcement (81): The rebar group type of stirrups is now correctly set to Normal when the horizontal Follow shape option is selected on the Main bars tab. Previously, the rebar group type was set to Tapered even if the stirrups were correctly created horizontally.
|
TSAC-5388 |
Concrete components |
Reinforced concrete stair (95): In rebar H, both parts in the secondary rebar shape now take the rebar attributes properly for each part. |
TSAC-5548 |
Concrete components |
Anchor (10): When creating a connection profile as a custom part, it is now correctly added a sub-assembly to a panel or column. |
TSAC-5654 |
Concrete components |
Wall layout: Offsetting an edge that is split with an extra point into two collinear pieces now works correctly. Now it is also possible to split an edge in an opening (this was not working earlier) and use direct modification to adjust the offsets properly both at the exterior edges and the opening edges. |
TSAC-5661 |
Concrete components |
Embedded anchors (8): Anchors are now placed correctly when you create them in the gap between the layers of the wall assembly. |
TSAC-5702 |
Concrete components |
Corbel reinforcement (81):
- The double U-bar stirrup shape for transverse stirrups is now created correctly according to the option selected in Follow shape.
- The spacing values defined for stirrup group 2 on the Stirrups tab now work correctly.
|
TSAC-5736 |
Concrete components |
Mesh bars: Horizontal bars in narrow walls are now created correctly. |
TSAC-2285 |
Steel components |
Truss (S78): Previously, in some cases the bottom chord was created differently on the right and the left side. This has now been fixed. |
TSAC-4960 |
Steel components |
Cap plate detail: The width and height of a cap plate, and also the part start number, are now modified when only the corresponding check boxes are selected. |
TSAC-5503 |
Steel components |
Brace corner simple (49): Previously, bolts were rotated when the secondary parts were twin profiles. This has now been fixed. |
TSAC-5542 |
Steel components |
Stairs (S71): Previously, steps chamfers were not created correctly, when you defined some of the step size values as zero. This has now been fixed. |
TSAC-5563 |
Steel components |
Tube gusset (20): Previously, brace connection stiffeners were not created on both sides of secondary parts number 2-10. This has now been fixed. |
TSAC-5721 |
Steel components |
Two sided end plate (142): Previously, when filler plates were created, galvanizing holes were created in the last filler plate. This has now been fixed, and galvanizing holes are always created in end plates.
|
TTSD-37885 |
Import, export, interoperability |
Trimble Connector: Measurement markups sometimes showed 1.0 millimeter short of the actual distance between the measurement points. Now the displayed measurement values are rounded correctly to the nearest integer. |
TTSD-43161 |
Import, export, interoperability |
Overlay models: You can now select rebars that are inside another object. |
TTSD-43958 |
Import, export, interoperability |
In overlay models, you can now snap to objects inside another object. |
TTSD-44591 |
Import, export, interoperability |
Curved and circular rebar sets are now visible in IFC2x3 CV2 overlay models. |
TTSD-45047 |
Import, export, interoperability |
IFC2x3 export: Now the dialog box remembers the previous Location by setting when the dialog box is closed and reopened. |
TTSD-45724 |
Import, export, interoperability |
Export 3D DWG: Previously, when you used GUID in the Layer name as functionality, the export transformed the GUID to an invalid format. This has now been fixed, and the GUID retains its original format. |
TTSD-45757, TTSD-45548 |
Import, export, interoperability |
Model upload performance to Trimble Connect has been improved, especially in situations where pours are included.
|
TTSD-45791 |
Import, export, interoperability |
Export drawings to DWG/DXF: The export now works more consistently with the different base point exporting options. |
TTSD-45794 |
Import, export, interoperability |
Base points with duplicate names no longer prevent the IFC export dialog box from opening. Additionally, you can now use the model diagnose to detect duplicate base point name issues.
|
TTSD-46028 |
Import, export, interoperability |
Export drawings to DWG/DXF: Drawing hatches using invisible colors behave now better in the DWG export. |
TTSD-46054 |
Import, export, interoperability |
Trimble Connect: The model upload to Trimble Connect performance has been improved. |
TTSD-46055 |
Import, export, interoperability |
IFC4 export: The OBJECT_TYPE attribute is now supported properly by the IFC4 export. |
TTSD-46201 |
Import, export, interoperability |
The uploading of model to Trimble Connect has been improved when the model contains macros. |
TTSD-46218 |
Import, export, interoperability |
IFC export: The boolean type can now be selected in Additional property sets. |
TTSD-46479 |
Import, export, interoperability |
When exporting a model from Trimble Connector, sometimes the folder path could not be retrieved from the server. This has now been fixed. |
TPLED-205, TPLED-258 |
Templates and reports |
Previously, a CopyField function could give a wrong result when it was used in a value field with a conditional expression (if-then-else) in its formula. This has now been fixed. |
TPLED-209 |
Templates and reports |
It is now possible to have 32nd and 64th precision in templates, reports, marks and dimensions in imperial units.
|
TTSD-43428 |
Templates and reports |
The default color mode for the PDF reports was originally black and white, but had changed to color. This has now been fixed, and the default color mode is again black and white. |
TTSD-43948 |
Templates and reports |
PDF reports could appear blank if report dimensions were not whole numbers, and Locale was set to decimal commas. This has now been fixed. |
TTSD-45184 |
Templates and reports |
Template editor:
- You can now specify a character for data separation: fVF(data file, lookup value, column#[, separator character])
- You can now use a preferred column separator of choice. Previously, it was possible to use only spaces as separators.
This enables the support for spaces in names, profiles, shapes, and so on, as well as the use of distance lists as input.
- You can also use blank or empty strings as input.
- Leading and trailing white space is dropped.
- Template Editor supports several separators, so " ,;\t" would make all the space, comma, semi-colon, and tab characters separators.
|
TTSD-45281, TTSD-45320 |
Templates and reports |
When the NextValue() and IsLast() functions were used together in a row rule, rows could sometimes be left out from the final output. This has now been fixed. |
TTSD-45812 |
Templates and reports |
Previously, after duplicate rows were combined, the GetFieldFormula() function did not give the correct result if the referenced value field was in the combined row (and had sum-action defined during combine). This has now been fixed.
REVISION rows cannot be defined on their own anymore. They need to be defined together with DRAWING row. |
TTSD-46629 |
Templates and reports |
Template editor: Output 0 as empty string did not work with imperial units when fractions were used. This has now been fixed. |
TSAC-5156 |
Drawings |
When using the Filter dimensioning method for rebars with a 3D shape, the dimension point is now placed at the longest leg of the bar. Earlier, the dimension point was placed at the start or end point of the bar.
|
TSAC-5467 |
Drawings |
Rebar mesh view creator: The Rebar mesh view creator tool now considers bent meshes with hook endings. |
TSAC-5513 |
Drawings |
Rebar group marking: A new setting, Center position number to line, has been added to the Mark 3 tab to center the rebar position number to the end line. This will automatically place the position number as the first element in the list and align this element with the leader line. |
TSAC-5742 |
Drawings |
View-level dimensioning: In some rare cases, rule-based dimensioning failed to create dimensions. This has now been fixed. |
TTSD-34421 |
Drawings |
When specifying plot file names for the XS_DRAWING_PLOT_FILE_NAME advanced options, conditional text using "?" did not work for UDA and TPL fields. This has now been fixed. |
TTSD-37118 |
Drawings |
Document manager: Issuing general arrangement drawings in Document manager while the drawing was open could cause offset lines to become skewed. This has now been fixed. |
TTSD-41766 |
Drawings |
Document Manager: Document Manager previously closed during a shared model read-in, because there were occasional conflicts between file watchers in Document Manager and the file updating process. Now, these conflicts are prevented, and Document Manager remains open during the read-in process. |
TTSD-42215 |
Drawings |
Dimension associativity in drawings could fail to work when you had modified the drawing views with the direct modification handles. This has now been fixed. |
TTSD-42765 |
Drawings |
Creating and opening general arrangement drawings, and opening the layout editor is now remarkably faster, in some scenarios even 50% faster. |
TTSD-44644 |
Drawings |
Printing: The Print on multiple sheets option was not working correctly. This has now been fixed.
|
TTSD-44650 |
Drawings |
Embedded steel part bolts were drawn to incorrect layers in drawings. This has now been fixed. |
TTSD-44773 |
Drawings |
Linking drawing views in a multidrawing failed when the source drawing already contained some linked views. This has now been fixed. |
TTSD-45483 |
Drawings |
Drawing content manager: Drawing content manager shows assemblies more reliably now. |
TTSD-45551 |
Drawings |
Layout editor: Moving keyplans in drawing layouts now works more reliably. |
TTSD-45583 |
Drawings |
Printing: Printing drawings with invalid data could cause Tekla Structures to crash. This has now been fixed so that if a drawing contains invalid data, the printing will stop at that point, and the drawing is labeled as incomplete. |
TTSD-46042 |
Drawings |
Printing: The Print Drawings dialog box did not respond correctly if you had not selected any drawings in Document Manager. This has now been fixed. |
TTSD-46045 |
Drawings |
Document manager: Previously, in certain cases, there was an exception in Document manager that occurred when Show changes from now on was used. This has now been fixed. |
TTSD-46405 |
Drawings |
In drawings, dragging drawing views while some plugins are selected in the views now works better. |
TTSD-46593 |
Drawings |
Document manager: Previously, Document manager included the hidden internal DocumentId property in any searches, which resulted in unexpected search results. This has now been fixed. |
TTSD-46813 |
Drawings |
Document manager: The behavior of the Select all command has been changed. Previously, if the number of the currently selected documents was less than the total number of displayed documents, all documents were selected, but if all were already selected, then everything was unselected. This meant that if a single item was visible and the user right-clicked it (at which point it became selected) and then selected Select all from the context menu, the document was actually deselected. That made it impossible for macros to reliably select single items in the document list. This behavior has been changed so that now all visible items are always selected and the toggling behavior is disabled. |
TTSD-45880 |
Tekla Model Sharing |
In a shared model, when you are not signed in and click the Write in or Write out icon, if you cancel the sign in, you are no longer prompted to sign in again.
|
TTSD-46033 |
Tekla Model Sharing |
Tekla Model Sharing icons in the Quick Access Toolbar have been improved to better show the read in and write out arrows. |
TTSD-45521 |
Reinforcement |
Previously, if the rebar numbering prefix contained a number with decimals, for example, 10.3, it did not work correctly in filtering. This has now been fixed. |
TTSD-27680 |
Modeling |
Previously, in certain situations, bent plates similar in Tekla Structures 2018 were getting different numbers in later Tekla Structures versions. This has now been fixed. |
TTSD-32101 |
Modeling |
Now, if a mesh name is found in the mesh standard file but with custom values, the name will be changed to Custom mesh whenever any mesh value is modified in the Property pane. |
TTSD-33374 |
Modeling |
Panning and zooming performance has now been improved in models with many complex items when DirectX rendering is used. |
TTSD-40531 |
Modeling |
DirectX rendering: Artefacts are not displayed anymore on the selected planes when picking in 3D views. |
TTSD-40544 |
Modeling |
Now objects remain visible on the plane view when a clip plane is used. |
TTSD-41934 |
Modeling |
Previously, additional dashed lines could appear on surface treatment. This has now been fixed. |
TTSD-42477 |
Modeling |
Previously, connection component coordinate system sometimes flipped randomly in certain symmetrical cases, such as when connecting two parallel parts of the same length. Now, small numerical noise is ignored so that in symmetrical cases the component will be inserted to the same side consistently. |
TTSD-43327 |
Modeling |
In DX rendered views, when the Dashed line for hidden lines option is set to Off, the rendering of parts works now correctly when viewed from an angle. |
TTSD-43364 |
Modeling |
Previously, in some rare situations, modifying custom components could create empty assemblies to the model, causing problems in numbering, for example. This has now been fixed. You can remove the existing empty assemblies from the model with the Repair model command. |
TTSD-43842 |
Modeling |
In certain cases, bent plates created in the Tekla Structures 2018 version were broken in newer Tekla Structures versions. This has now been fixed.
|
TTSD-43996 |
Modeling |
Previously, in certain situations, bent plates that were similar in Tekla Structures 2018, were getting different numbers in later Tekla Structures versions. This has now been fixed. |
TTSD-44822 |
Modeling |
Clash checking could previously crash Tekla Structures in some situations. This has now been fixed. |
TTSD-45068 |
Modeling |
Now, complex shapes are shown with their real colors instead of being dark. |
TTSD-45286 |
Modeling |
Previously, Tekla Structures could sometimes crash when converting a single user model to a multi-user model. This has now been fixed. |
TTSD-45299 |
Modeling |
DirectX rendering: Taking screenshot that exceeds the Windows clipboard capacity 4MB does not cause a crash anymore. Nothing is placed on the clipboard and there is no crash.
|
TTSD-45470 |
Modeling |
Previously, huge fittings could be created when work planes were used. This has now been fixed. |
TTSD-45657 |
Modeling |
Previously, Tekla Structures would crash if the shape definition XML file had empty values, for example, in the BrepGUID field. Crashing is now prevented and errors are logged in these situations. Diagnose model now detects these situations and reports them. |
TTSD-45680 |
Modeling |
Previously, there could be extreme slowness when calculating parametric profiles with deeply recursive parameter dependency. This has now been fixed. |
TTSD-23878 |
Core |
Now a new error message is shown if Tekla Structures cannot properly open and read the LoadRole.ini file. This error is typically caused by using incompatible Tekla Structures environment and Windows locale settings, for example, a Japan environment and Finnish locale. |
TTSD-44161 |
Core |
A cut modeled flush to a part face could in some cases freeze Tekla Structures during model view opening. This has now been fixed. |
TTSD-44224 |
Core |
Support tool: If a crash in Tekla Structures is encountered, the Windows logs of the type Error from the last 72 hours are attached to the Support tool automatically. They can be skipped by clearing the Crash information file check box. |
TSAC-4803 |
Tools and components |
Custom Component Dialog Editor settings are now saved in the current model folder. The options set are applied only to the current model instead of the Tekla Structures version as before. |
TSAC-5565 |
Tools and components |
Layout manager:
When creating new names for layout points and layout lines with no names, the Layout manager does not add the default prefix to the name anymore. Previously, layout point and layout line names consisted of the default prefix followed by a number. Now the new name consists of numbers only. Auto Naming a group now allows empty prefixes when creating new names for the layout points and layout lines in a group.
|
TSAC-5605 |
Tools and components |
Ultrazed file transfer (93) now identifies side rail support struts and heavy duty side rail struts that have been defined without cleats. These manually created situations will now be flagged as requiring a drawing for Hadley Industries to produce. |
TTSD-46206 |
Tools and components |
Previously, Tekla Structures was not responding in certain models when creating new system components. This has now been fixed.
|
TTSD-34416 |
User interface |
When you set the Dashed line for hidden line option to on in the DirectX 3D model view, obsolete dashed hidden lines are not shown anymore, only the relevant lines are shown. |
TTSD-44322 |
User interface |
In DirectX rendered 3D model views, when the Dashed line for hidden line option is set on, rounded parts do not get additional triangles anymore. |
TTSD-45306 |
User interface |
Cyrillic characters are now shown correctly on the grid when the Windows system locale is set to Russian. |
TSAC-5378 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): You can now automatically recognize certain cut types as mountparts using the new option, Cuts as mountparts, on the TS configuration tab. Select the cut type: Designated only, All, Recesses, Within contour, or Recesses within. |
TSAC-5567 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Two new options have been added to the option Export assemblies on the Embeds tab. The first option exports all sub-assembly parts as one object with continuous geometry, and the second one exports all sub-assembly parts as one object with distinct geometry of each part.
|
TSAC-5568 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): You can now use circle and arc shapes in the special assembly export file. Circle is defined by the special symbol K followed by the circle radius. Arc is defined by the special symbol B followed by the arc radius, start angle and end angle. |
TSAC-5576 |
Import, export, interoperability (concrete) |
EliPLAN export (68): User is now notified via log when the net area calculation fails. |
TSAC-5580 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Previously, when using a special assemblies definition file, the optional setting for having a custom logic for embed height coordinate was not working. This has been fixed, and now a selection of mountparts can be set to export at bottom of the pallet, at the embed bottom level, or at the embed center-of-gravity level. |
TSAC-5590 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Previously, when protruding cutouts were excluded from the export, they extended the contour incorrectly. This has now been fixed. |
TSAC-5617 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Using the product types Thermo wall (1st stage) and Thermo wall (2nd stage) in the object UDAs will now produce an export file with a separate HEADER block for each of the two stages of the thermal wall, similarly as with double walls. |
TSAC-5680 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): On the MOUNPART block data tab, you can now specify the installation type of the embed by defining a UDA, class, name or user-defined text. Additionally, you can now specify a different mountpart name source for the insulation or cutpart mountparts. |
TSAC-5685 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): The placement logic of the geometry detailing strip parts has been improved, and the parts are now added to the correct shell of the double walls. |
TSAC-5697 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Meshes collected from rebar groups that are set to be exported as embeds now have a rectangular bounding box geometry. Also reinforcement with a cage UDA specified to be exported as embed by name on the Embeds tab is now exported with a cage bounding box. |
TSAC-5769 |
Import, export, interoperability (concrete) |
Export Unitechnik (79): Previously, when the Rebar grouping setting was turned on, the export sometimes created duplicated rebars. This has now been fixed. |