Welded tee (32)

Tekla Structures
Upraveno: 29 Říj 2024
2024
Tekla Structures

Welded tee (32)

Welded tee (32) connects a beam to a column or to another beam using a T-shaped piece of an I-profile welded to the main part and bolted to the secondary beam web.

Objects created

  • Tee part

  • Bolts

  • Welds

Use for

Situation Description

Welded tee connected to a column and bolted to a beam.

Selection order

  1. Select the main part.

  2. Select the secondary part.

    The connection is created automatically when the secondary part is selected.

Part identification key

Description

1

Tee part

Picture tab

Use the Picture tab to define the connection dimensions.

Dimensions

Description Default

1

Tee part edge distance from the secondary part top.

2

Tee part edge distance from the secondary part bottom.

3

Gap between the main part and the secondary part.

The value you define affects the tee part size.

10 mm

Parts tab

Use the Parts tab to define the part properties.

Parts

Option Description Default

Profile

Select the profile from the profile catalog.

The same as the secondary part profile.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Finish

Describes how the part surface has been treated.

Parameters tab

Use the Parameters tab to define the tee part position.

Tee part position

Option Description

Default

Tee part is on the left side.

AutoDefaults can change this option.

Tee part is on the left side.

Tee part is on the right side.

Primary bolts tab

Use the Primary bolts tab to define the main part bolt group dimensions and bolt properties.

Bolt group dimensions

Description

1

Select how to measure the dimensions for horizontal bolt group position.

  • Left: From the left edge of the secondary part to the leftmost bolt.

  • Middle: From the center line of the secondary part to the center line of the bolts.

  • Right: From the right edge of the secondary part to the rightmost bolt.

2

Dimension for horizontal bolt group position.

3

Bolt edge distance.

Edge distance is the distance from the center of a bolt to the edge of the part.

4

Number of bolts.

5

Bolt spacing.

Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values.

6

Select how to measure the dimensions for vertical bolt group position.

  • Top: From the upper edge of the secondary part to the uppermost bolt.

  • Middle: From the center line of the bolts to the center line of the secondary part.

  • Below: From the lower edge of the secondary part to the lowest bolt.

7

Dimension for vertical bolt group position.

Connect to primary

Select how the profile is connected to the main part.

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Slotted holes

You can define slotted, oversized, or tapped holes.

Option

Description

Default

1

Vertical dimension of slotted hole.

0, which results in a round hole.

2

Horizontal dimension of slotted hole, or allowance for oversized holes.

0, which results in a round hole.

Hole type

Slotted creates slotted holes.

Oversized creates oversized holes.

No hole does not create holes.

Tapped creates tapped holes.

Rotate Slots

When the hole type is Slotted, this option rotates the slotted holes.

Slots in

Part(s) in which slotted holes are created. The options depend on the component in question.

Bolt assembly

The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.

If you want to create a hole only, clear all the check boxes.

To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.

Bolt length increase

Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.

Staggering of bolts

Option

Description

Default

Not staggered

AutoDefaults can change this option.

Not staggered

Staggered type 1

Staggered type 2

Staggered type 3

Staggered type 4

Secondary bolts tab

Use the Secondary bolts tab to define the secondary part bolt group dimensions and bolt properties.

Bolt group dimensions

Description

1

Select how to measure the dimensions for horizontal bolt group position.

  • Left: From the left edge of the secondary part to the leftmost bolt.

  • Middle: From the center line of the secondary part to the center line of the bolts.

  • Right: From the right edge of the secondary part to the rightmost bolt.

2

Dimension for horizontal bolt group position.

3

Bolt edge distance.

Edge distance is the distance from the center of a bolt to the edge of the part.

4

Number of bolts.

5

Bolt spacing.

Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values.

6

Select how to measure the dimensions for vertical bolt group position.

  • Top: From the upper edge of the secondary part to the uppermost bolt.

  • Middle: From the center line of the bolts to the center line of the secondary part.

  • Below: From the lower edge of the secondary part to the lowest bolt.

7

Dimension for vertical bolt group position.

Bolt basic properties

Option

Description

Default

Bolt size

Bolt diameter.

Available sizes are defined in the bolt assembly catalog.

Bolt standard

Bolt standard to be used inside the component.

Available standards are defined in the bolt assembly catalog.

Tolerance

Gap between the bolt and the hole.

Thread in mat

Defines whether the thread may be within the bolted parts when bolts are used with a shaft.

This has no effect when full-threaded bolts are used.

Yes

Site/Workshop

Location where the bolts should be attached.

Site

Slotted holes

You can define slotted, oversized, or tapped holes.

Option

Description

Default

1

Vertical dimension of slotted hole.

0, which results in a round hole.

2

Horizontal dimension of slotted hole, or allowance for oversized holes.

0, which results in a round hole.

Hole type

Slotted creates slotted holes.

Oversized creates oversized holes.

No hole does not create holes.

Tapped creates tapped holes.

Rotate Slots

When the hole type is Slotted, this option rotates the slotted holes.

Slots in

Part(s) in which slotted holes are created. The options depend on the component in question.

Bolt assembly

The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.

If you want to create a hole only, clear all the check boxes.

To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.

Bolt length increase

Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.

Staggering of bolts

Option

Description

Default

Not staggered

AutoDefaults can change this option.

Not staggered

Staggered type 1

Staggered type 2

Staggered type 3

Staggered type 4

General tab

Click the link below to find out more:

General tab

Design tab

Click the link below to find out more:

Design tab

Analysis tab

Click the link below to find out more:

Analysis tab

Bylo to užitečné?
Předchozí
Další