US EnvHelp: Bolt Catalogs
Environment
United States (Imperial)
United States (Metric)
Here is a list of the bolts, nuts, washers, and anchors in US Bolt Catalog and information about where the data is taken from.
| Bolt Diameters | Standard | Type | Reference | Comment |
|---|---|---|---|---|
| 1/4" through 1"1/2, 1/8" increments | A307 | Image
| AISC 14th - Tables 7-19 & 7-20 | Hex head. |
| 1/2" through 1"1/2, 1/8" increments | A325 | Image
| AISC 14th - Tables 7-14 & 7-18 | |
| 1/2" through 1"1/2, 1/8" increments | A325T | Image
| www.aisc.org | A325 bolts but fully threaded. |
| 1/2" through 1"1/2, 1/8" increments | A325TC | Image
| AISC 14th - Tables 7-14 & 7-18 | |
| 1/2" through 1"1/2, 1/8" increments | A490 | Image
| AISC 14th - Tables 7-14 & 7-18 | |
| 1/2" through 1"1/2, 1/8" increments | A490TC | Image
| AISC 14th - Tables 7-14 & 7-18 | |
| 1/4" through 1"1/2, 1/8" increments | BEVEL | Image
| AISC 14th - Table 7-14 | Thicknesses based on F436 Square or Rect. washer T thickness Mean values. |
| 1/4" through 1"1/2, 1/8" increments | PLAIN | Image
| AISC 14th - Table 7-14 | Thicknesses based on F436 Circular washer T thickness Max values. |
| 1/2" through 1"1/2, 1/8" increments | A325-DTI | Image
| Portland Bolt | Load Indicating Washers. Thickness after compression. |
| 1/2" through 1"1/2, 1/8" increments | A490-DTI | Image
| Portland Bolt | Load Indicating Washers. Thickness after compression. |
| 1/4" through 1"1/2, 1/8" increments | HEX | Image
| AISC 14th - Table 7-19 | |
| 1/4" through 1"1/2, 1/8" increments | HEX_JAM | Image
| Portland Bolt | Hex Jam Nuts |
| 3/8" through 1"1/2, 1/8" increments | HEX_TC | Image
| AISC 14th - Table 7-19 | |
| 1/2" through 1"1/2, 1/8" increments | HEAVY_HEX | Image
| AISC 14th - Table 7-19 | |
| 1/4" through 1"1/2, 1/8" increments | HV_HEX_JAM | Image
| Portland Bolt | Heavy Hex Jam Nuts |
| 1/4" through 1", 1/8" increments | STUD | Image
| Nelson Stud Welding | |
| 3/4" | UNDEF_BOLT | Image
| NA | Duplicates of 3/4" A325 bolts. Used for passing CCs from one environment to another. |
| 1/4" through 1", 1/8" increments | UNDEF_STUD | Image
| NA | Duplicates of Studs. Used for passing CCs from one environment to another. |
| 3/8" through 1" | EPOXY_ANC | Image
| Hilti | Dimensions similar to Hilti HIT-HY 150 MAX HAS-E Threaded Rod. |
| 1/4", 3/8" | FH_SLEEVE | Image
| Hilti | Dimensions similar to Hilit HLC-FPH. |
| 1/4" | RD_SLEEVE | Image
| Hilti | Dimensions similar to Hilti HLC-RS. |
| 5/16", 3/8", 1/2" | SLEEVE_ANC | Image
| Hilti | Dimensions similar to Hilti HLC-H. |
| 1/4" through 1", 1/8" increments | WEDGE | Image
| Hilti | Dimensions similar to HILTI Kwik Bolt 3 Carbon Steel Std. |
| 0" diameter | NONE | Image
| NA | Used in Bolt Assemblies like EPOXY_ANC where nuts are not needed because they come with the assembly from the supplier. |
| 0" diameter | NONE | Image
| NA | Used in Bolt Assemblies like EPOXY_ANC where washers are not needed because they come with the assembly from the supplier. |
| 5/16", 3/8", 1/2" | SLEEVE | Image
| Portland Bolt | SAE Washer Dimensions |
| 1/4" through 1", 1/8" increments | WEDGEW | Image
| Portland Bolt | SAE Washer Dimensions |
| METRIC | ||||
| M16 - M36 | A325M | Image
| ATSM | |
| M16 - M36 | A325MT | Image
| ASTM | A325M bolts but fully threaded. |
| M16 - M36 | A490M | Image
| ATSM | |
| M16 - M36 | BEVEL_M | Image
| ATSM | Soft Metric Conversion. |
| M16 - M36 | PLAIN_M | Image
| ATSM | F436M. Max values used. |
| M16 - M36 | HVY_HEX_M | Image
| ATSM | A563M. Max values used. |
| M12 - M36 | HEX_JAM_M | Image
| Portland Bolt | Soft Metric Conversion. |
| M6 - M25 | EPOXYANC_M | Image
| Hilti | Soft Metric Conversion. |