India Environment_Steel_Help file

2020

Tekla Structures

2021

Tekla Structures

2022

Tekla Structures

2023

Tekla Structures

2024

Tekla Structures

2025

Tekla Structures

Environment

India

General Instructions :

1. This article helps you to understand about available settings (like reports, filters, attributes, etc.) in India Environment pertaining to Steel segment.
2. Model Template "General _ Steel" available in India Environment could be used to practice and learn all settings listed in this article.
3. Model Template "Secondary Steel Structures" available in India Environment could be used to practice and learn about Modelling, Connections of Stairs, Ladders, Handrails etc.
3. Settings available in "Common" Environments and some "Standard" attributes which are system default settings are not listed in this article.
4. Generally, there is no need to modify system-specific settings or installation files. Do not modify them if you are not an administrator.

1. Model Template
2. Model settings
2.1 Radial Grids
2.2 Column Part Properties
2.3 Beam Part Properties
2.4 Weld Properties
2.5 Construction objects
2.6 Numbering
2.7 Model Filter_All role
2.8 Model Filter_Steel role
2.9 Model Filter_Engineering role
2.10 Connection attributes
2.10.1 Welded connection attributes
2.10.2 Bolted connection attributes
2.10.3 Connections/Components for secondary steel structures
2.11 NC files
2.12 Organizer_All role
2.13 Organizer_Steel role
2.14 Organizer_Engineering role
2.15 Organizer Filters_All role
2.16 Organizer Filters_Steel role
2.17 Organizer Filters_Engineering role
2.18 Object representation_All role
2.19 Object representation_Steel role
2.20 Object representation_Engineering role
2.21 Reports_ All role
2.22 Reports_ Steel role
2.23 Reports_Engineering role
2.24 Profiles
2.25 Custom Components
2.26 Custom Inquiry_All role

3. Drawing settings

1. Model template

1.1 General_Steel

1.2 Secondary_Steel Structures

1A_ Model Template_Secondrary_Steel(For help file).png

Go to Top

2. Model settings

2.1 Radial Grids

Available attributes for Radial grid:
Attribute name: 90

Attribute name: 180

Attribute name: 270

Attribute name: 360

Go to Top

2.2 Column Part Properties

Available attributes for Column part:

Column
ISMB_Column
ISMC_Column
ISA_Column
T_Column
Pipe_Column
Plate
RHS_Column

Go to Top

2.3 Beam Part Properties:

Available attributes for Beam part:

Beam
H_brace
Purlin
V_brace
angle
angle_brace
channel
plate
t_brace
Tubes
Bent_plate

Go to Top

2.4 Weld Properties

Available attributes for weld:

A_DesignThroatThk
Staggered
Z_Leglength

Go to Top

2.5 Construction objects

Available attributes for Construction Line:

Constructionline_Dashdot

Constructionline_Dashedline

Constructionline_Dottedline

Constructionline_Slashed

Constructionline_Solid

Available attributes for Construction Circle:

Constructioncircle_Dashdot

Constructioncircle_Dashedline

Constructioncircle_Dottedline

Constructioncircle_Slashed

Constructioncircle_Solid

Available attributes for Construction Arc:
Construction_arc_Dashdot

Construction_arc_Dashedline

Construction_arc_Dottedline

Construction_arc_Slashed

Construction_arc_Solid

Available attributes for Construction PolyCurve:

Construction_Pcurve_Dashdot

Construction_ Pcurve_Dashedline

Construction_ Pcurve_Dottedline

Construction_Pcurve_Slashed

Construction_Pcurve_Solid

Go to Top

2.6 Numbering

Available attributes for numbering:

1_Initial_Numbering

2_Before_Creating_Drawings

3_After_Creating_Drawings

4_After_Issuing_Drawings_for_Fab

Restart_Numbering

Go to Top

2.7 Model Filters_All role

SI.No	Connection number/Name	(The below files are available in Environments > India > General > model_filters) You can select / view
1	2-Steel_filter	only steel part(s) (1) but won't get the cut(s,)weld(s) & bolt(s) even though if you switch on cut(s), weld(s), bolt(s) options in view properties > Display > (2) you will get all the steel parts even though if they are connected with Cast in place or Precast parts by bolt(s) or weld(s)
2	Steel-angle	the steel part(s) which are modelled by "L" profile type
3	Steel-beams	the steel part(s) which are containing part name as "BEAM"
4	Steel-bracings	the steel part(s) which are containing part name as "BRAC"
5	Steel-channels	the steel part(s) which are containing part name as "CHANNEL" or which modelled by using the profile type "U"
6	Steel-columns	the steel main part(s) which are containing part name as "COLUMN"
7	Steel-gratings	the steel main part(s) which are containing part name as "GRATING"
8	Steel-handrail	the steel part(s) which are having the part name as "HR" or "HANDRAIL" or "STANCHION" or "HAND" or "RAIL"
9	Steel-hbrace	the steel part(s) which are having the assembly prefix as "HB*" or which are containing the part name as "BRACE"
10	Steel-ladder	the steel part(s) which are having the assembly prefix as "L" or which are containing the part name as "LADDER"
11	Steel-main-parts	the steel main part(s)
12	Steel-parts	only Steel part(s) which are not connected with Cast in place & Precast parts by bolt(s) or weld(s)(But won't get the cut(s), weld(s), bolt(s) even though if you switch on cut(s), weld(s), bolt(s) options in view properties > Display > )
13	Steel-platedbeam	the steel part(s) which are having the assembly prefix as "PG"
14	Steel-plates	the steel part(s) which are modelled by profile type "B"
15	Steel-purlin	the steel part(s) which are containing part name as "PURLIN"
16	Steel-rafter	the steel part(s) which are containing part name as "RAFTER"
17	Steel-sec-parts	the steel secondary part(s)
18	Steel-stair	the steel part(s) which are having the part name as "STAIR" or "STEP" or "STRINGER"
19	Steel-truss	the steel part(s) which are having the part name or assembly name as "TRUSS"

Go to Top

2.8 Model Filters_Steel Role

SI.No	Filter Name	(The below files are available in Environments > India > Steel > model_filters) You can select / view
1	Anchor_rod	the part(s) which are having part name as "ANCHOR*"
2	A_Precast	only precast objects & the part(s) which are welded/bolted with precast part(s)
3	A_Castinplace	only Cast in place objects & part(s) which are welded/bolted with Cast in place part(s)
4	A_Steel	steel Part(s) along with Cut(s), Weld(s) & Bolt(s) if you switch on Cuts, Welds, Bolts options in view properties > Display > & you will not get the steel parts which are connected with CIP or Precast part(s). in other words , we can say that You will get the part(s) which contains Steel material.
5	Connection_Red	the connection which are having Red colour connection symbol
6	Connection_Yellow	the connection which are having Yellow colour connection symbol
7	Connection_Green	the connection which are having Green colour connection symbol
8	Connection_144	the connection 144 (End plate) along with the nested Custom component connection(s)
9	Connection_40_Haunch	the connection 40 (Haunch) along with the nested Custom component connection(s)
10	Connection_41_Cranked beam	the connection 41 (Cranked beam) along with the nested Custom component connection(s)
11	Connection_146_Shearplatesimple	the connection 146 (Shear plate simple) along with the nested Custom component connection(s)

Go to Top

2.9 Model Filters_Engineering Role

SI.No	Filter Name	You can view/select
1	Name-Angle	the part(s) which are having ISA profile or L profile or part name as "ANGLE"
2	Name-Beam	the part(s) which are having part name as "BEAM"
3	Name-Beam_Column	the part(s) which are having part name as "BEAM" or "COLUMN"
4	Name-Brace	the part(s) which are containing part name as "BRACE"
5	Name-Channel	the part(s) which are modelled by using the profiles ISJC,ISLC,ISMC or which are having the part name as "CHANNEL"
6	Name-Column	the part(s) which are having part name as "COLUMN"
7	Name-Plate	the part(s) which are modelled by using the profiles PLT,FLT,PL,FL or which are having the part name as "PLATE"
8	Name-Truss	the part(s) which are having part name as "TRU

Go to Top

2.10 Connection attributes:

The below connection attributes will help you to understand about the connection and their parameters.

The profile (Size) mentioned in the Description column in the below table is considered for these connection attributes.

2.10.1 Welded connection attributes:

SI.No	Connection number/Name	Description	Attribute name	Remarks (This connection attribute can be used)
1	141/Clip angle	Column to Beam (ISMB300)	WC_CB	To connect the beam to column by weld
2	141/Clip angle	Column to Beam (ISMB300)	WC_CB_Cleat	To connect the beam to column by weld, Seating cleat weld with Column
3	141/Clip angle	Column to Beam (ISMB300)	WC_CB_Stiffener	To connect the beam to column by weld, Stiffeners weld with column
4	141/Clip angle	Column to Beam (ISMB300)	WC_CB_Cleat_Stiffener	To connect the beam to column by weld, Seating cleat & stiffeners weld with Column
5	141/Clip angle	Beam to Beam (ISMB300 to ISMB300)	WC_BB	To connect the beam to beam by weld
6	41/Cranked beam	Column to Rafter (ISMB300)	WC_PLATE	To connect the Column to Rafter by weld
7	1047/U.S. Base plate	Column (ISMB400)	BP_STIFFENERS	To create Base plate with all Stiffeners
8	1047/U.S. Base plate	Column (ISMB400)	BP_STIFFENERS1245	To create Base plate with Stiffeners 1,2, 4 & 5
9	1047/U.S. Base plate	Column (ISMB400)	BP_STIFFENERS3678	To create Base plate with Stiffeners 3, 6, 7 & 8
10	1047/U.S. Base plate	Column (ISMB400)	BP_ANCHORRODS	To create Base plate with Anchor rods
11	144/End plate	Column to Beam (ISMB300)	WC_CB_Endplate	To connect the beam to column by weld
12	143/Two sided clip angle	Column to 2 Beams (ISMB300)	WC_CB_COLUMN	To connect 2 beams to column (Cleat Shop weld with Column)
13	143/Two sided clip angle	Column to 2 Beams (ISMB300)	WC_CB_BEAMS	To connect 2 beams to column (Cleat Shop weld with beams)
14	11/Bolted Gusset	Column to Vertical brace (L75X75X6)	WC_CBR	To connect the column to Vertical bracing (Weld)
15	11/Bolted Gusset	Column to Vertical brace (L75X75X6)	WC_CBR_BP	To connect the column to Vertical bracing (Weld)
16	60/Wraparound gusset cross	Column to Horizontal brace (ISA100x100x10)	WC_CBR_H1	To connect the column, beam to Vertical bracing (Bolt)
17	60/Wraparound gusset cross	Column to Horizontal brace (ISA100x100x10)	WC_CBR_H2	To connect the column, beam to Vertical bracing (Bolt)_Different Notch at column
18	1064/Multiple stiffeners	Beam (ISMB300)	STIFF_1	To add the Stiffeners in beam (Near side)
19	1064/Multiple stiffeners	Beam (ISMB300)	STIFF_2	To add the Stiffeners in beam (Far side)
20	1064/Multiple stiffeners	Beam (ISMB300)	STIFF_BS	To add the Stiffeners in beam (Both sides)
21	106/Apex Haunch	Rafter to Rafter (ISMB300 TO ISMB300)	WC_Haunch	To connect the Rafter to Rafter
22	40/Haunch	Column to Beam (ISMB300)	WC_CB_BRACKET	To connect the beam to column by bolt

Go to Top

2.10.2 Bolted connection attributes:

SI.No	Connection number/Name	Description	Attribute name	Remarks (This connection attribute can be used)
1	141/Clip angle	Column to Beam (ISMB300)	BC_CB	To connect the beam to column by bolt
2	141/Clip angle	Column to Beam (ISMB300)	BC_CB_Cleat	To connect the beam to column by bolt, Seating cleat weld with Column
3	141/Clip angle	Column to Beam (ISMB300)	BC_CB_Stiffener	To connect the beam to column by bolt, Stiffeners weld with column
4	141/Clip angle	Column to Beam (ISMB300)	BC_CB_Cleat_Stiffener	To connect the beam to column by bolt, Seating cleat & stiffeners weld with Column
5	141/Clip angle	Beam to Beam (ISMB300)	BC_BB	To connect the beam to beam by bolt
6	141/Clip angle	Beam to Beam (ISMB300)	BC_BB_Notch	To connect the beam to Built up beam by bolt and Notch can be adjusted
7	40/Haunch	Column to Beam (ISMB300)	BC_CB_BRACKET	To connect the beam to column by bolt
8	106/Apex Haunch	Rafter to Rafter (ISMB300 TO ISMB300)	BC_Haunch	To connect the Rafter to Rafter
9	144/End plate	Column to Beam (ISMB300)	BC_CB_Endplate	To connect the beam to column by bolt
10	144/End plate	Column to Beam (ISMB300)	BC_CB_Endplate_Cleat	To connect the beam to column by bolt , seating cleat also appear
11	143/Two sided clip angle	Column to 2 Beams (ISMB300)	BC_CB_BEAMS	To connect 2 beams to column (Bolt with beams)
12	143/Two sided clip angle	Column to 2 Beams (ISMB300)	BC_CB_COLUMN	To connect 2 beams to column (Bolt with Column)
13	143/Two sided clip angle	Column to 2 Beams (ISMB300)	BC_CB_BS	To connect 2 beams to column (Bolt with Column & Beams)
14	11/Bolted Gusset	Column to Vertical brace (L75X75X6)	BC_CBR	To connect the column to Vertical bracing (Bolt)
15	11/Bolted Gusset	Column to Vertical brace (L75X75X6)	BC_CBR_BP	To Vertical bracing (Bolt),Gusset touch with baseplate
16	60/Wraparound gusset cross	Column to Horizontal brace (ISA100x100x10)	BC_CBR_H1	To connect the column, beam to Vertical bracing (Bolt)
17	60/Wraparound gusset cross	Column to Horizontal brace (ISA100x100x10)	BC_CBR_H2	To connect the column, beam to Vertical bracing (Bolt)_Different Notch at column
18	41/Cranked beam	Column to Rafter (ISMB300)	BC_PLATE	It can be used to connect the Column to Rafter by bolt

Go to Top

2.10.3 Connections/Components for secondary steel structures (Stairs/Handrails etc.)

You can use the Model template "Secondary_Steel Structures" to know more about the below attributes.

SI.No	Connection Name/Number	Attribute name
1	Stairs (S71)	standard.m1000071
2	Stairs (S71)	Different_Stringer.m1000071
3	Stairs (S71)	customstep.m1000071
4	Stairs details (1039)	standard.j1039
5	Ship ladder (1)	standard.p_ShipLadder
6	Ship ladder (1)	Type_1.p_ShipLadder
7	Ship ladder (1)	Type_2.p_ShipLadder
8	Ship ladder (1)	Type_3.p_ShipLadder
9	Ship ladder (1)	Type_4.p_ShipLadder
10	End plate (29)	2bolts.j29
11	Stanchions (S76)	Post_wit_Endpl.m1000076
12	Railings (S77)	Hrail.m1000077
13	Railings (S77)	Hrail_M.m1000077
14	Ladder (S35)	Front_Exit.m1000035
15	Ladder (S35)	Left_Exit.m1000035
16	Ladder (S35)	Right_Exit.m1000035
17	Stanchion side profile (86)	standard.j86
18	Kickplate(S75)	Split_Kick_Plate.m1000075
19	Stanchions - Railings - Kick Plates (S86)	Hrail with BasePl.m1000086
20	Stanchions - Railings - Kick Plates (S86)	Hrail with ShearPl.m1000086
21	Stanchions - Railings - Kick Plates (S86)	Stair_Hanrdails.m1000086
22	Kickplate(S75)	Stair_Handrails.m1000075
23	Handrailing (1024)	standard.j1024
24	Railing beam to beam (88)	Create.j88
25	Railing beam to beam (88)	Extend_Polybeam.j88
26	Stanchions - Railings - Kick Plates (S86)	Stair_Hand_BothSide_Continuous.m1000086
27	Stanchions - Railings - Kick Plates (S86)	Stair_Hand_Left_Continuous.m1000086
28	Stanchions - Railings - Kick Plates (S86)	Stair_Hand_BothSide_Continuous.m1000086
29	Railings (S77)	BothSide_Continuous.m1000077
30	Railings (S77)	Left_Continuous.m1000077
31	Railings (S77)	Right_Continuous.m1000077
32	Railings (S77)	Bothside_Continuous_Extended.m1000077
33	Railings (S77)	Left_Continuous_Extended.m1000077
34	Railings (S77)	Right_Continuous_Extended.m1000077
35	Stairs (S71)	Different_Stringer.m1000071
36	Railing beam to beam (88)	Create_L_Shape.j88
37	Railing beam to plane (89)	Extend.j89
38	Railing beam to plane (89)	Create.j89
39	Stanchion side plate (83)	standard.j83
40	Stanchion curved (84)	standard.j84
41	Stanchion double plate (87)	standard.j87
42	Stringer stanchion Lprof (68)	standard.j68
43	Stringer stanchion stiff (69)	standard.j69
44	Railing double curve (95)	standard.j95
45	Railing double curve (95)	Straight_Piece.j95
46	Create hole around part (92)	Profile.j92
47	Create hole around part (92)	Rectangular.j92
48	Hole generation (32)	Profile.m80000032
49	Hole generation (32)	Circular.m80000032
50	Hole generation (32)	Rectangular.m80000032

Go to Top

2.11 NC files:

Below attributes are available for NC file generation.
These attributes created to provide general idea about the features only.

SI.No	Attribute name	Description
1	Contour_Profile	You can use this attribute to create NC file for Profiles with Contour marking
2	Plate NC	You can use this attribute to create NC file for Plates
3	Popmarks_Profile	You can use this attribute to create NC file for Profiles with popmarks

Image

Go to Top

2.12 Organizer_All role:

2.12.1 Categories:

2.12.1.1 Material:

This category automatically collects all Material type and categories based on the below sub categories as shown in below image. The selection is “Component" for this category.

2.12.2 Object Browser:

You can refer the below images to know about the output from the object Brower template.

2.12.2.1 Default

2.12.2.2 DrawingsFromModel

2.12.2.3 Quantity takeoff

Go to Top

2.13 Organizer_Steel role:

2.13.1 Categories:

2.13.1.1 Assemblies:

This category automatically collects all Steel objects (Assemblies) and categories based on "Name" as shown in below image. The selection is "Assembly" for this category.

2.13.1.2 Steel Parts:

This category automatically collects all steel parts and no sub categories set for this category. The selection is “Part" for this category.

2.13.1.3 Bolts :

This category automatically collects all bolt groups and categories based on the below sub categories as shown in below image. The selection is “Bolt" for this category.

2.13.1.4 Welds :

This category automatically collects all welds and categories based on the below sub categories as shown in below image. The selection is “Weld" for this category.

2.13.1.5 Components :

This category automatically collects all connections and categories based on the below sub categories as shown in below image. The selection is “Component" for this category.

2.13.1.6 Lotting :

This category automatically collects all steel parts and no sub categories set for this category. The selection is “Part" for this category.

2.13.1.7 Same start_end point:

This category automatically collects all steel parts and no sub categories set for this category. The selection is “Part" for this category.

This category created to find start & end point of the parts.
You can use this category to find the duplicate profiles from the "Count" in object browser

For an example, If 2 profiles are having the same start, end points (Duplicate profiles) in all 3 axes, you will find the "Count" as "2" in object browser.

Image

Additional notes: You may find the profile count more than 1, It doesn't mean that these profiles are duplicate, Count may be more than 1 due to the position parameters which set in the part properties.

For an example, you will find the "Count" as "2" in object browser, if 2 profiles are having the same start & end points in all 3 axes,
but controlled the position with the help of "Part "position" tab.(On Plane > Left> - 205 and On plane > Right > -205)

Image

Image

Image

Image

So this category can be used to identify the parts which have the same start & end points in all 3 axes, then you can get the duplicate parts
from the model if any available.

2.13.2 Object Browser :

You can refer the below images to know about the output from the object browser template.

2.13.2.1 Assembly_overall-dimension :

2.13.2.2 Assembly-List-steel :

2.13.2.3 Bolt-List :

2.13.2.4 Connection-list :

2.13.2.5 Duplicate parts :

2.13.2.6 Erection :

2.13.2.7 Lotting :

2.13.2.8 Part-List-steel :

2.13.2.9 Phase list :

2.13.2.10 Weld List :

Go to Top

2.14 Organizer_Engineering role:

2.14.1 Categories:

2.14.1.1 Components (Refer from Steel role _ 2.13.1.5 Components )

2.14.1.2 Design Status : (User Defined Attribute)

This category automatically collects all parts and categories based on the below sub categories as shown in below image. The selection is “Assembly" for this category.

2.14.1.3 Object :

This category automatically collects all member data and categories based on Name as shown in below image. The selection is "Assembly" for this category.

2.14.1.4 Profile :

This category automatically collects all parts and categories based on the below sub categories as shown in below image. The selection is “Assembly" for this category.

2.14.2 Object Browser:

You can refer the below images to know about the output from the object Brower template.

2.14.2.1 Connection-list : (Refer from Steel role_2.13.2.4 Connection-list)

2.14.2.2 Duplicate parts : (Refer from Steel role_2.13.2.5 Duplicate parts)

2.14.2.3 Lotting :(Refer from Steel role_2.13.2.7 Lotting)

2.14.2.4 Part-List-steel : (Refer from Steel role_2.13.2.8 Part-List-steel)

Go to Top

2.15 Organizer Filters_All role:

Available Organizer filter in "All" role is below

2.15.1 ob-Part:

Go to Top

2.16 Organizer Filters_Steel Role:

Available Organizer filters in Steel role are below

2.16.1 ob_Bolt:

2.16.2 ob-Connection:

2.16.3 ob_Part-Steel:

2.16.4 ob_SteelAssembly:

2.16.5 ob_Weld:

2.16.6 ob-Part_All_Steel:

Go to Top

2.17 Organizer Filters_Engineering Role:

Available Organizer filters in Steel role are below

2.17.1 ob_Bolt (Refer from Steel role_2.16.1 ob_Bolt )

2.17.2 ob-Connection (Refer from Steel role_2.16.2 ob-Connection )

2.17.3 ob_Part-Steel (Refer from Steel role_2.16.3 ob_Part-Steel )

2.17.4 ob_SteelAssembly (Refer from Steel role_2.16.4 ob_SteelAssembly )

Go to Top

2.18 Object representation_All role:

2.18.1 ViewByPlannedErectionDate :

You can use this object representation to visualize the Assemblies in different colors depends upon the “Review Date” (Project stats Visualization) and “Planned_End_E” date (Assembly>UDA).

2.18.2 ViewBySchedFabricationDate:

You can use this object representation to visualize the Assemblies in different colors depends upon the “Review Date” (Project stats Visualization) and “Planned_End_F” date (Assembly>UDA).

Go to Top

2.19 Object representation_Steel role:

2.19.1 Erection_timeline:

You can use this object representation to visualize the Assemblies in different colors depends upon the “Review Date” (Project stats Visualization) and “Actual_End_E” date(Assembly>UDA).

Go to Top

2.20 Object representation_Engineering role:

The below object representation are available in this role.

2.20.1 Eng_AD_Check:

You can use this object representation to visualize the parts in different colors depends upon the option selected from the below Part’s UDA.

2.20.2 Eng_Length_Check:

You can use this object representation to visualize the parts in red colour which length exceeds 11999 mm.

2.20.3 Eng_Material_Check:

You can use this object representation to visualize the parts in different colors depends upon the option selected from the below Part’s UDA.

2.20.4 Eng_Position_Check:

You can use this object representation to visualize the parts in different colors depends upon the option selected from the below Part’s UDA.

2.20.5 Eng_Profile_Check:

You can use this object representation file to visualize the parts in different colors depends upon the option selected from the below Part’s UDA.

2.20.6 Eng_RFI_Status:

You can use this object representation to visualize the parts in different colors depends upon the option selected from the below Part’s UDA.

2.20.7 Eng_Show_Part_Material:

You can use this object representation to visualize the parts in different colors depends upon the “Assembly type”.

Go to Top

2.21 Reports_ All role:

The below table will let you know the reports that are available and what selection category you need to use in the model objects to create them properly. The tick sign denotes the right selection approach.
For eg, in order to get the report of connection_coordiantes.rpt you need to select the connection symbols, in case you select the parts or assemblies, report will not populate the correct information.

SI.NO.	Name of the reports	Part selection	Assembly selection	Bolt selection	Weld (Symbol) selection	Connection (Symbol) selection	Drawing Selection
1	connection_coordinates.rpt					✔
2	connection_list.rpt					✔
3	Drawing_list.rpt						✔
4	Drawing_Revision_Info (Excel).xls.rpt						✔
5	Id_select_part_list.rpt	✔
6	Id_select_part_position.rpt	✔
7	Material Summary list.csv.rpt	✔
8	Material Summary_list (Excel).xls.rpt	✔
9	Material_list.rpt	✔
10	Material_marks.rpt	✔
11	Material_Part_list (Excel).xls.rpt	✔
12	M-Prelim material.rpt	✔
13	Part_end_codes.rpt	✔
14	Part_hole.rpt	✔
15	Part_list_IND.rpt	✔
16	Partlist_work point Length.rpt	✔
17	Part-phase.rpt	✔
18	Plate_parts_only.rpt	✔
19	Q_Model_History_Report.rpt	✔				✔	✔
20	Q_Part_Ownership.rpt	✔
21	STAAD_Beam_report.rpt	✔
22	STAAD_Column_report.rpt	✔
23	Surfacing.rpt	✔	✔
24	Surfacing_Types.rpt	✔	✔
25	TS-Drawing_list(EXCEL).xls.rpt						✔
26	TS-Drawing_list(HTML).html.rpt						✔
27	TS-Material_list(EXCEL).xls.rpt	✔
28	TS-Material_list(HTML).html.rpt	✔	✔
29	TS-Welding_list(EXCEL).xls.rpt				✔
30	washer_list.rpt			✔
31	Weld_list.rpt	✔	✔
32	Weld_number_list.rpt				✔
33	dgn_attribute_info_file.drv.rpt	✔
34	STAAD.cnv.rpt	✔
35	notification_report.rpt

Refer below for the output of the reports.

2.21.1 connection_coordinates.rpt

2.21.2 connection_list.rpt

2.21.3 Drawing_list.rpt

2.21.4 Drawing_Revision_Info (Excel).xls.rpt

2.21.5 Id_select_part_list.rpt

2.21.6 Id_select_part_position.rpt

2.21.7 Material Summary list.csv.rpt

2.21.8 Material Summary_list (Excel).xls.rpt

2.21.9 Material_list.rpt

2.21.10 Material_marks.rpt

2.21.11 Material_Part_list (Excel).xls.rpt

2.21.12 M-Prelim material.rpt

2.21.13 Part_end_codes.rpt

2.21.14 Part_hole.rpt

2.21.15 Part_list_IND.rpt

2.21.16 Partlist_work point Length.rpt

2.21.17 Part-phase.rpt

2.21.18 Plate_parts_only.rpt

2.21.19 Q_Model_History_Report.rpt

2.21.20 Q_Part_Ownership.rpt

2.21.21 STAAD_Beam_report.rpt

2.21.22 STAAD_Column_report.rpt

2.21.23 Surfacing.rpt

2.21.24 Surfacing_Types.rpt

2.21.25 TS-Drawing_list(EXCEL).xls.rpt

2.21.26 TS-Drawing_list(HTML).html.rpt

2.21.27 TS-Material_list(EXCEL).xls.rpt

2.21.28 TS-Material_list(HTML).html.rpt

2.21.29 TS-Welding_list(EXCEL).xls.rpt

2.21.30 washer_list.rpt

2.21.31 Weld_list.rpt

2.21.32 Weld_number_list.rpt

2.21.33 dgn_attribute_info_file.drv.rpt

Refer to generate this report

2.21.34 STAAD.cnv.rpt

This reports gives you the list of unmapped STAAD profile in Tekla (Right hand side in this report), which needs to be mapped

2.21.35 notification_report.rpt

Refer to generate this report

Go to Top

2.22 Reports_Steel role:

SI.NO.	Name of the reports	Part selection	Assembly selection	Bolt selection	Weld (Symbol) selection	Connection (Symbol) selection	Drawing Selection
1	4D-Steel_Design.csv.rpt	✔	✔
2	4D-Steel_Erection.csv.rpt	✔	✔
3	4D-Steel_Fabrication.csv.rpt	✔	✔
4	450 TeklaEPM_Assembly_v4.rpt	✔	✔
5	450 TeklaEPM_BoltNutWasher_UserDefined_v1.rpt			✔
6	450 TeklaEPM_BoltNutWasher_v1.rpt			✔
7	450 TeklaEPM_Drawing_UserDefined_v1.rpt						✔
8	450 TeklaEPM_Drawing_v1.rpt						✔
9	450 TeklaEPM_DrawingStatus_v1.rpt						✔
10	450 TeklaEPM_Part_UserDefined_v1.rpt	✔	✔
11	450 TeklaEPM_Part_v2.rpt	✔	✔
12	450 TeklaEPM_PartStatus_v1.rpt	✔
13	450 TeklaEPM_Stud_UserDefined_v1.rpt			✔
14	450 TeklaEPM_Stud_v1.rpt			✔
15	450 TeklaEPM_Stud_v2.rpt			✔
16	A_multiAssemblyList.rpt	✔	✔
17	Assembly_bolt_list1.rpt	✔	✔	✔
18	Assembly_bolt_list2.rpt			✔
19	Assembly_cg.rpt	✔	✔
20	Assembly_lot_list.rpt	✔	✔
21	Assembly_part_hole_list.rpt	✔	✔	✔
22	Assembly_part_list.rpt	✔	✔
23	Assembly_phase_list.rpt	✔	✔
24	Assembly_stud_list.rpt			✔
25	B_screw_list.rpt			✔
26	Bolt_lengths_selection.rpt			✔
27	Bolt_list_complete.rpt			✔
28	D-multiDrawing_Weight.rpt						✔
29	D-multiDrawingContentList.rpt						✔
30	import_attributes.rpt	✔
31	import_revision_report.rpt
32	IND_connection_list_CustomComponents					✔
33	IND_connection_list_GUID					✔
34	IND_connection_list_System components					✔
35	IND_Drawing_List.rpt						✔
36	IND_locked_objects_report_Object_Type.rpt	✔		✔	✔
37	IND_notification_report(Title1)
38	IND_Profile list.csv	✔
39	IND_Profile list	✔
40	IND_Profile_list2	✔
41	locked_objects_report.rpt	✔
42	nut_list.rpt			✔
43	Part_list_bevels.rpt	✔
44	STAAD_PEB.cnv.rpt	✔	✔
45	STAAD_PEB_meters.cnv.rpt	✔	✔
46	TS-Assembly_list(Excel).xls.rpt	✔	✔
47	TS-Assembly_list(HTML).html.rpt	✔	✔
48	TS-Bolt_list(EXCEL).xls.rpt			✔
49	TS-Bolt_list(HTML).html.rpt			✔
50	TS-Shipping_list(EXCEL).xls.rpt	✔	✔
51	Weld_Error_List.rpt				✔
52	WELD_list_all.rpt				✔

Refer below for the output of the reports.

2.22.1 4D-Steel_Design.csv.rpt

2.22.2 4D-Steel_Erection.csv.rpt

2.22.3 4D-Steel_Fabrication.csv.rpt

2.22.4 450 TeklaEPM_Assembly_v4.rpt

2.22.5 450 TeklaEPM_BoltNutWasher_UserDefined_v1.rpt

2.22.6 450 TeklaEPM_BoltNutWasher_v1.rpt

2.22.7 450 TeklaEPM_Drawing_UserDefined_v1.rpt

2.22.8 450 TeklaEPM_Drawing_v1.rpt

2.22.9 450 TeklaEPM_DrawingStatus_v1.rpt

2.22.10 450 TeklaEPM_Part_UserDefined_v1.rpt

2.22.11 450 TeklaEPM_Part_v2.rpt

2.22.12 450 TeklaEPM_PartStatus_v1.rpt

2.22.13 450 TeklaEPM_Stud_UserDefined_v1.rpt

2.22.14 450 TeklaEPM_Stud_v1.rpt

2.22.15 450 TeklaEPM_Stud_v2.rpt

2.22.16 A_multiAssemblyList.rpt

2.22.17 Assembly_bolt_list1.rpt

2.22.18 Assembly_bolt_list2.rpt

2.22.19 Assembly_cg.rpt

2.22.20 Assembly_lot_list.rpt

2.22.21 Assembly_part_hole_list.rpt

2.22.22 Assembly_part_list.rpt

2.22.23 Assembly_phase_list.rpt

2.22.24 Assembly_stud_list.rpt

2.22.25 B_screw_list.rpt

2.22.26 Bolt_lengths_selection.rpt

2.22.27 Bolt_list_complete.rpt

2.22.28 D-multiDrawing_Weight.rpt

2.22.29 D-multiDrawingContentList.rpt

2.22.30 import_attributes.rpt

2.22.31 import_revision_report.rpt

This report added in exclude list in advanced option.

2.22.32 IND_connection_list_CustomComponents

Custom components which are used in the model(Part type will not be listed)

2.22.33 IND_connection_list_GUID

2.22.34 IND_connection_list_System components

2.22.35 IND_Drawing_List.rpt

2.22.36 IND_locked_objects_report_Object_Type.rpt

2.22.37 IND_notification_report(Title1)

1) Enter the user name(For an example : "User1") in the "Design assigned to" UDA in the part or
Assembly in the model mode 2) Enter the user name(For an example : "User2" in the "Assigned to" UDA
in the drawing mode for drawings 3) Enter the user name in "Title1" in Report dialog box

Refer the advanced option for more details

2.22.38 IND_Profile list.csv

2.22.39 IND_Profile list

2.22.40 IND_Profile_list2

2.22.41 locked_objects_report.rpt

Works for locked part , not for locked Assembly

2.22.42 nut_list.rpt

2.22.43 Part_list_bevels.rpt

2.22.44 STAAD_PEB.cnv.rpt

This reports gives you the list of unmapped STAAD profile in right side and equivalent Tekla profile in left side if the STAAD profile is TAPERED profiles.

This reports gives you the list of unmapped STAAD profile in Tekla (Right side in this report) if they are not TAPERED profiles, which needs to be mapped.

2.22.45 STAAD_PEB_meters.cnv.rpt

This reports gives you the list of unmapped STAAD profile in right side and equivalent Tekla profile in left side if the Staad profile is TAPERED profiles.

This reports gives you the list of unmapped STAAD profile in Tekla (Right side in this report) if they are not TAPERED profiles, which needs to be mapped.

You can use any one of the reports (STAAD_PEB.cnv.rpt or STAAD_PEB_meters.cnv.rpt) depends upon the Staad model units whether it is modelled in meters or in millimeters.

2.22.46 TS-Assembly_list(Excel).xls.rpt

2.22.47 TS-Assembly_list(HTML).html.rpt

2.22.48 TS-Bolt_list(EXCEL).xls.rpt

2.22.49 TS-Bolt_list(HTML).html.rpt

2.22.50 TS-Shipping_list(EXCEL).xls.rpt

2.22.51 Weld_Error_List.rpt

2.22.52 WELD_list_all.rpt

Go to Top

2.23 Reports_Engineering role:

SI.NO.	Name of the reports	Part selection
1	Eng_Checklist.rpt	✔
2	Eng_Checklist_Beam_Levels.rpt	✔
3	Eng_Checklist_Column_Locations.rpt	✔
4	Eng_Checklist_Columns.rpt	✔
5	Eng_Checklist_PartNames_Full.rpt	✔
6	Eng_Checklist_PartNames_Summary.rpt	✔
7	Eng_Design_Forces.rpt	✔
8	Eng_Material_Report.rpt	✔
9	Eng_Part_Utility_Ratio_and_Forces_ID.rpt	✔
10	Eng_Part_Utility_Ratio_ID.rpt	✔