How to create Pipe Development Single part Drawing ( Unwrap)
2022
Tekla Structures
2021
Tekla Structures
2020
Tekla Structures
2023
Tekla Structures
2024
Tekla Structures
2025
Tekla Structures
2026
Tekla Structures
Environment
Not environment-specific
Procedure explains how one can create pipe development drawing along with dimensions.
1. Create Pipe/tubular members with PD or SPD profiles.
Image
2. Create connections at node using Tekla System macros. Ex. - Round Tube(23) or Tube plug-ins.
Image
Image
3. Create Single part drawing using wrap_tp setting and create drawing .
Image
Note: - 'Wrap_tp' setting for single part drawing is available in default environment. You can copy wrap_tp.wd file from default environment to your model to get this setting in dropdwon.
4. To draw inner and outer contours seperately for thick plates , set below variable to a decimal value .Tekla Structures will create both inner and outer contour for pipes thicker than this value .
Set the variable set XS_TUBE_UNWRAP_LIMIT_THICKNESS = 16
Image
5. To create dimensions , use "Wraparound Dimensioning"
https://warehouse.tekla.com/#/catalog/details/u1bad5b1c-3545-4e70-8abf-887c4895eec4
Image
